26655 Clip&art gallery...;Display the clipart gallery;Display the clipart gallery;
26656 Clipart gallery
26657 Dragging clipart '#1%s'
26658 Drop to load this clipart for viewing
26659 Can't move clipart between sections.
26664 F&ill gallery...;Display the fill gallery;Display the fill gallery;
26665 Fill gallery
26666 Dragging fill '#1%s'
26667 Drop to apply the fill to this object
26668 Drop to apply the fill to these objects
26669 Drop to Insert a new Bitmap object on the Page
26670 Can't move fills between sections.
26674 &Install
26675 Install &All
26676 &Skip
26677 &Deinstall
26678 Deinstall &All
26679 &Update
26680 &Remove
26681 &Keep
26682 &Overwrite
26683 &Add
26684 &Scan
26685 &With
26686 With&out
26687 &Retry
26688 &All Selected
26689 &Create
26694 Invalid folder.
26695 There is a problem with the folder's index file. Use the 'Add' button to add a new folder to the gallery.
26696 The folder '#2%s' doesn't have a #1%s index.
26697 The folder '#2%s' doesn't have a #1%s index. Would you like to create a new index with or without thumbnails?
26698 That folder already has an index. Are you sure you want to update it?
26699 Problems creating index for that folder.
26700 You cannot deinstall fonts currently being used.
26701 There were problems installing '#1%s'.
26702 There were problems deinstalling '#1%s'.
26703 This font is already installed.
26704 Would you like to remove the existing font folders from the gallery before adding new ones or keep them?
26705 Would you like to remove the existing clipart folders from the gallery before adding new ones or keep them?
26706 Would you like to remove the existing fills folders from the gallery before adding new ones or keep them?
26707 Can't create new index because the existing one is read only.
26708 Can't find the folder '#2%s' for the #1%s gallery. Would you like to add a different folder to the gallery? (Is the CD present ?)
26709 Would you like to create the new index with or without thumbnails? (Thumbnails will only be created for non-Studio files. Some disk space will be required to store them)
26710 The specified folder cannot be written to.
26711 Can't create thumbnail for '#1%s'.
26712 Can't find any suitable files to add to the index for the specified folder.
26713 Creating index
26714 Scanning folder(s)
26715 Scanning possible files in folder
26716 Failed to locate the required folder. Is the correct CD present?
26717 Are you sure you want to remove the selected sections?
26718 Updating Gallery Resource Management file
26719 Are you sure you want to create a new index? Disk space may be required to generate thumbnails for non-Studio files.
27136 You are using an old version of #1%s. Program reliability may be affected.
27137 The ACCUIMR5.DLL has not been found. Only simple bitmap import/export options will be available.
27138 Filter is not present
27139 &PhotoCD import options; Change the sort of image that is imported
27140 Could not load the bitmap as it contains a bad colour depth (BPP), width or height
27141 Could not create the necessary bitmap, possibly due to lack of memory or a bad file
27142 None
27143 LZW
27144 Huffman
27145 Group 3 Fax
27146 Group 4 Fax
27147 Packbits
27148 2D encoding
27149 Bitmap import aborted due to user intervention
27150 Bitmap export aborted due to user intervention
27168 Bitmap
27169 Windows bitmap
27170 Brook Trout
27171 CALS
27172 Multi-Page PCX (DCX)
27173 CompuServe GIF
27174 Story Board (GX2)
27175 Halo CUT
27176 Amiga IFF (ILBM)
27177 GEM IMG
27178 IBM IOCA
27179 JPEG
27180 KOFAX
27181 Laser View
27182 MacPaint
27183 Microsoft Icons
27184 Microsoft Paint
27185 PaintBrush PCX
27186 Photo CD
27187 PhotoShop
27188 Macintosh PICT
27189 Sun Raster
27190 TrueVision TARGA
27191 TIFF
27192 WordPerfect Group
27193 X Windows bitmap/pixmap
27200
27201 bmp
27202 301
27203 cal
27204 dcx
27205 gif
27206 gx2
27207 cut
27208 iff
27209 img
27210 ica
27211 jpg
27212 kfx
27213 lv
27214 mac
27215 ico
27216 msp
27217 pcx
27218 pcd
27219 psd
27220 pct
27221 ras
27222 tga
27223 tif
27224 wpg
27225 xbm,xpm
27232 Importing bitmap file...
27233 Importing BMP file...
27234 Importing Brook Trout file...
27235 Importing CALS file...
27236 Importing DCX file...
27237 Importing GIF file...
27238 Importing GX2 file...
27239 Importing Halo CUT file...
27240 Importing IFF file...
27241 Importing GEM IMG file...
27242 Importing DCX file...
27243 Importing JPEG file...
27244 Importing KOFAX file...
27245 Importing LaserView file...
27246 Importing MacPaint file...
27247 Importing MS Icons file...
27248 Importing MS Paint file...
27249 Importing PCX file...
27250 Importing PhotoCD file...
27251 Importing PhotoShop file...
27252 Importing PICT file...
27253 Importing SUN raster file...
27254 Importing TARGA file...
27255 Importing TIFF file...
27256 Importing WPG file...
27257 Importing X Windows bitmap/pixmap file...
27264 Exporting bitmap file...
27265 Exporting BMP file...
27266 Exporting Brook Trout file...
27267 Exporting CALS file...
27268 Exporting DCX file...
27269 Preparing GIF file...
27270 Exporting GX2 file...
27271 Exporting Halo CUT file...
27272 Exporting IFF file...
27273 Exporting GEM IMG file...
27274 Exporting IOCA file...
27275 Exporting JPEG file...
27276 Exporting KOFAX file...
27277 Exporting LaserView file...
27278 Exporting MacPaint file...
27279 Exporting MS Icons file...
27280 Exporting MS Paint file...
27281 Exporting PhotoCD file...
27282 Exporting PhotoShop file...
27283 Exporting PCX file...
27284 Exporting PICT file...
27285 Exporting SUN raster file...
27286 Exporting TARGA file...
27287 Exporting TIFF file...
27288 Exporting WPG file...
27289 Exporting X Windows bitmap...
27290 Exporting GIF file...
27296 Accusoft
27297 Accusoft BMP
27298 BrookTrout
27299 CALS
27300 DCX
27301 GIF
27302 GX2
27303 Halo CUT
27304 IFF
27305 IMG
27306 IOCA
27307 JPEG
27308 KOFAX
27309 LaserView
27310 MacPaint
27311 MS Icons
27312 MS Paint
27313 PhotoCD
27314 PhotoShop
27315 PCX
27316 PICT
27317 SUN
27318 TARGA
27319 TIFF
27320 WPG
27321 XWindows
27328 Export various format files
27329 Export BMP format files
27330 Export Brook Trout format files
27331 Export CALS format files
27332 Export DCX format files
27333 Export GIF format files
27334 Export GX2 format files
27335 Export Halo CUT format files
27336 Export IFF format files
27337 Export IMG format files
27338 Export IOCA format files
27339 Export JPEG format files
27340 Export KOFAX format files
27341 Export LaserView format files
27342 Export MacPaint format files
27343 Export MS Icons format files
27344 Export MS Paint format files
27345 Export PCX format files
27346 Export PhotoCD format files
27347 Export PhotoShop format files
27348 Export PICT format files
27349 Export SUN raster format files
27350 Export TARGA format files
27351 Export TIFF format files
27352 Export WPG format files
27353 Export X Windows bitmap/pixmap format files
27361 Internal error from the bitmap loader/savers
27362 Not enough memory is available to complete the task
27363 The file could not be found (open call failed)
27364 This bitmap file has a problem in it and hence is unreadable
27365 A bad string, possibly the pathname, has been specified
27366 A bad return has occurred
27367 Cannot create the specified file
27368 This bitmap format is not allowed, possibly due to bad resolution information or colour depth
27369 No bitmap has been found
27370 An error has occurred when writing to the file, possibly disk full
27371 A bad display area has been specified, either negative or out of range coordinates
27372 The specifed bitmap page has not been found
27373 A disk read error has occurred by going passed the end of file
27374 A bad Accusoft image handle has been specified
27375 The specified image was not found on the clipboard
27376 The specfied scanner driver has not been installed
27377 The scanner driver is bad or the driver has not been configured correctly
27378 The twain.dll cannot be found
27379 A problem has happened when decompressing the file
27380 The date on an evaluation copy has expired
27381 Vbx runtime version not allowed for design mode
27382 Tried to save an image to a format not supporting that colour depth (bits per pixel)
27383 The specfied operation will not work on images with palettes
27384 There is no LZW code or gif in this version
27392 Gallery display options...
27393 Gallery display options...
27394 Find Gallery items...
27395 #1%s
27396 #1%s
27397 Apply item to selection
27398 Create new item
27399 Delete items
27400 Edit this item
27401 Redefine from selection
27402 Undo
27403 Display options
27404 Rename this item
27405 Apply this item to the document selection
27406 Create a new item (will duplicate a selected item)
27407 Delete all selected items
27408 Edit this item
27409 Redefine this item from the document selection
27410 Undo the last action
27411 Set gallery display options
27412 Rename this item
27413 Display full information
27414 Display as large icons
27415 Display as small icons
27416 Display as icons only
27417 Drag to change the display order of the list
27418 Drop here to move/copy the dragged item above this one
27419 Drop here to move/copy the dragged item below this one
27420 Searching... Press 'Esc' to abort
27421 Sorting gallery items...
27424 Some of those colours are in use in your document- Objects using these colours will look the same, but their colour will not be editable until you apply a new colour to them
27425 Delete all selected
27426 Delete only unused
27427 , Spot colour
27428 , #1%ld% Tint of #2%s
27429 , Linked to #1%s
27430 (not in use)
27431 Also apply this sort to the colour bar
27432 This operation can only be applied to colours in the selected document
27433 Only colours in the selected document will be deleted
27434 Are you sure you wish to redefine this colour from the colour of the selected object(s)?
27435 Redefine
27436 Name colour...
27437 Create a new colour style
27438 Create
27439 Rename a colour style
27440 Rename
27441 Display the colour gallery
27456 Foreground layers in #1%s
27457 Background layers in #1%s
27488 Install selected fonts
27489 Deinstall selected fonts
27490 Installs the selected fonts onto your system
27491 Deinstalls the selected fonts from your system
27492 Add new clipart
27493 Add new clipart from your hard drive or CD ROM
27494 Add new fills
27495 Add new fills from your hard drive or CD ROM
27496 Add new fonts
27497 Add new fonts from your hard drive or CD ROM
27504 Open as new document
27505 Import into this document
27506 Copy to clipboard
27507 Open this item as a new document
27508 Import this item into the selected document
27509 Copy this item onto the clipboard
27510 Generate new indices
27511 Generate new library indices for this gallery
27512 Update files
27513 Load/Save the selected library items
27514 Add a new library from your hard drive or CD ROM
27515 Add new library
27516 Remove selected groups from your library gallery
27517 Remove selected groups
27520 Insert a new bitmap object
27521 Apply a bitmap as a fill
27522 Apply a bitmap as a transparency
27523 Trace a bitmap
27524 Apply effects to a bitmap
27525 Insert bitmap object
27526 Apply as fill
27527 Apply as transparency
27528 Trace bitmap
27529 Bitmap effects
27530 This is not a grey level bitmap. Would you like to create a grey level version, and apply that instead ?
27531 Create
27532 Save a bitmap
27533 Save bitmap
27552 None
27553 Sort by name
27554 Sort by hue
27555 Sort by intensity
27556 Sort by model
27557 Sort by memory size
27558 Sort by width
27559 Sort by height
27560 Sort by quality
27561 Sort by name length
27600 There is no object selected in the document from which I can redefine this colour
27601 You are trying to redefine that colour from itself!
27602 That will be hard to find! Fill in the search-text field and try again
27603 No (further) matches found
27604 Search aborted
27648 There is currently no selected object, so the current spread will be exported. This may be large in size. Do you still want to export?
27649 The user cancelled the dialog box.
27650 &Bitmap export options; Change the export depth and bits per pixel
27651 An invalid dpi value has been set
27652 The options dialog is already open
27653 Bad section name in DeclareSection
27654 Bad current section in GetSection
27655 Bad setting of preference in View section
27656 Bad setting of preference in Edit section
27657 Bad setting of preference in General section
27658 Bad reading of preference in View section
27659 Bad reading of preference in Edit section
27660 Bad reading of preference in General section
27661 An invalid constraint angle has been set
27662 An invalid duplicate distance has been set
27663 An invalid nudge distance has been set
27666 export bitmap options
27667 Options
27668 Export
27669 Import
27670 Custom
27671 Small
27672 Medium
27673 Medium with scroll bar
27674 Large with scroll bar
27675 An invalid magnetic point distance has been set
27676 An invalid magnetic line distance has been set
27677 An invalid page height has been set
27678 An invalid page width has been set
27679 An invalid bleed size has been set
27680 The options dialog is already open
27681 Document options
27682 Page resizing or other page attribute changes not implemented yet
27683 An invalid file list size has been set
27684 An invalid grid spacing has been set
27685 An invalid number of grid divisions has been set
27686 An invalid page margin has been set
27687 Bad reading of preference in Undo section
27688 Bad setting of preference in Undo section
27689 This will result in the loss of undo information, do you want to continue?
27690 &Resize
27691 &Don't resize
27692 Unable to reduce the maximum size of the operation history, doing so would result in the loss of redo info
27693 An invalid undo size has been set
27694 Bad reading of preference in Scaling section
27695 Bad setting of preference in Scaling section
27696 An invalid drawing scale has been set
27697 An invalid real scale has been set
27698 An invalid drawing and/or real scale has been set as the calculated scaling factor is bad.
27699 Bad reading of preference in Tune ups section
27700 Bad setting of preference in Tune ups section
27701 An invalid amount of limited redraw memory has been set.
27702 The minimum allowed is
27703 An invalid number of gallery cache items has been set
27704 Undo sizing changes not implemented yet
27705 Page resize; Page resize; Page resize;
27706 Grid resize; Grid resize; Grid resize;
27707 That file seems to be empty
27708 Page layout options for
27709 Scaling for
27710 Undo size for
27711 Units for
27712 Window options for
27713 Automatic
27714 Export aborted due to user intervention
27715 &Page options...;Change the page size for this spread
27716 The print options dialog is already open
27717 &Print options; Customise the printing based options
27718 Print options
27719 This file was produced by a newer version of Studio and cannot be loaded. Please contact Xara Ltd for upgrade information
27720 An error has been detected in the file
27721 An error has been detected in the file
27722 A stream error has been detected in the file
27723 There has been a data error detected in the file
27724 Insufficient memory to deal with that file
27725 A buffer error has been detected in the file
27904 This is an example string
28416 This is an example string
28672 Could not open the input file.
28673 EPS files (*.eps) | *.eps ||
28674 Import file
28676 Error detected in EPS file at line #1%d [#2%d]
28677 Ran out of memory while reading EPS file
28678 That EPS file is not recognised by this import filter
28679 EPS stack limit exceeded (is this EPS file corrupted?)
28680 EPS import aborted due to user intervention
28681 String token is too long in EPS file
28682 The EPS file did not contain any graphical objects to import.
28683 &Export ArtWorks EPS;Export as an ArtWorks format EPS file;EPS Export
28684 Export ArtWorks EPS
28685 Adobe Illustrator 3.0 EPS
28686 Import Illustrator 3.0 EPS format files
28687 Adobe Illustrator 5.0 EPS
28688 Import Illustrator 5.0 EPS format files
28689 ArtWorks EPS
28690 Import ArtWorks EPS format files
28691 CorelDRAW 4.0 EPS
28692 Import CorelDRAW 4.0 EPS format files
28693 Windows Metafiles
28694 Import Windows 16-bit Metafiles
28695 All files
28696 Import any file
28697 Drawings
28698 Import any drawing file
28699 Bitmaps
28700 Import any bitmap file
28701 Not enough memory to create a new document
28702 Error detected in Document structure (could not find attribute)
28703 Importing Illustrator EPS...
28704 Importing Illustrator 5.0 EPS...
28705 Importing Corel 3.x EPS...
28706 Importing Corel 4.0 EPS...
28707 Importing ArtWorks EPS...
28708 Importing Acorn Draw file...
28709 Importing 16bit Windows Metafile...
28736 Export file
28737 Could not open the output file.
28738 &Info bar;Toggle the Info Bar;Info Bar
28739 Insufficient memory to create the new Tool's info bar.
28740 Unable to create dialog box.
28741 Exporting Illustrator EPS...
28742 Exporting CorelXARA EPS...
28743 A serious internal error occured while exporting.
28756 An error was detected while importing that Acorn Draw file.
28757 Ran out of memory while reading Acorn Draw file.
28758 That file is not an Acorn Draw file
28759 Acorn Draw
28760 Import Acorn RISC OS Draw format files
28761 One or more objects in this file were incorrect and have been ignored.
28768 Your initialisation file was created by an older version of CorelXARA and may be incorrect - would you like to use the default settings?
28769 Unable to clear initialisation file
28770 Error during writing of settings file
28784 &Import...;Import file into the document;Import file
28785 Unable to find the filter to import that file with.
28786 That file is not recognised by any of the installed filters.
28787 &Export...;Export a file from the document;Export file
28788 Error detected in Metafile.
28789 This file may not be suitable for this filter - are you sure you wish to import this file?
28790 &Import
28791 &Don't Import
28792 This file import operation has been aborted.
28793 This file contains gradient fills that are not yet supported by CorelXARA - they have been approximated.
28794 You are not exporting as CorelXARA EPS - this may cause loss of information from the drawing. Are you sure you wish to export in this format?
28795 &Export
28796 &Don't Export
28797 String length exceeded while reading file
28798 You have used one or more transparent fractal fills, which are not yet supported in EPS due to their provisional status. Information will be lost from your drawing.
28800 linear graduated fill
28801 radial fill
28802 conical fill
28803 bitmap fill
28804 linear fill mapping
28805 sinusoidal fill mapping
28806 RGB fade fill
28807 rainbow fill
28808 alternate rainbow fill
28809 quality
28816 CorelXARA
28817 Warning from CorelXARA
28818 Error from CorelXARA
28819 Spurious internal error has occured.
28820 Serious Error from CorelXARA
28821 CorelXARA has suffered an error while trying to display a message - the next error message may not be displayed correctly.
28822 Use &Default settings
28823 Keep &Current Settings
28832 CorelXARA has suffered a serious internal error.
28833 The filename is too long for CorelXARA to handle.
28848 All files
28849 Drawings
28850 Bitmaps
28851 Adobe Illustrator
28852 Adobe Illustrator 5.0
28853 ArtWorks EPS
28854 CorelDRAW 3.x EPS
28855 CorelDRAW 4.x EPS
28856 Acorn Draw
28857 Windows 16-bit metafiles
28858 Windows Bitmaps
28859 EPS files
28860 CorelXARA EPS
28861 CorelDRAW palette
28862 CorelDRAW
28864 ai,eps
28865 eps
28866 drw,aff
28867 wmf
28868 bmp
28869 EPS files
28870 Import any supported EPS file
28871 pal,cpl
28872 cdr,cdt
28880 A read error occured (#1%s) with the file: #2%s
28881 A write error occured (#1%s) with the file: #2%s
28882 permission denied
28883 bad file handle
28884 file already exists
28885 too many open files
28886 file does not exist
28887 no space left on device
28888 unknown
28889 bitmap
28890 bitmaps
28891 PROLOG_PS
28892 SETUP_PS
28893 PSRESTYPE
28894 Unable to print because a system error occured. Check that the printer is not off-line or out of paper.
28928 Rik's example string
28929 The line/shape did not have enough memory to insert a new item.
28935 Converting EPS...
28936 The line/shape reported an error while freeing memory.
28969 Dialog Render Demo;Displays a dialog with a GDraw render region in it
28970 The Freehand tool was unable to find its cursors.
28973 Set view quality
28974 View &Quality Slider;Use this slider to change Quality setting for the document.;Set view quality
28976 CorelXARA
28977 art
28978 CorelXARA
28979 Load CorelXARA document
28980 Loading CorelXARA document...
28981 Saving CorelXARA document...
28982 The document could not be opened as it was not a CorelXARA Document.
28983 The document failed to load due to a lack of memory.
29002 Save &template;Save the document as the template for all new documents;Save the document as a template
29003 You are about to replace the template document from which all new documents are made. New documents will look like this document from now on. The current template document will be removed.
29004 Save
29005 Cancel
29006 DEFAULT_DOC
29007 DOCRESTYPE
29008 template.art
29009 An error was detected in the metafile. The import has been aborted.
29010 This file contains some items that cannot be converted using this version of the Metafile loader.
29184 group
29185 groups
29186 rectangle
29187 rectangles
29188 objects
29189 line
29190 lines
29191 chapter
29192 chapters
29193 spread
29194 spreads
29195 page
29196 pages
29197 layer
29198 layers
29199 Always on &Top
29200 There is insufficient space in the undo system for this operation. If you continue then you will be unable to undo
29203 Continue
29204 There is insufficient space in the undo system for this operation. If you continue then you will be unable to redo
29205 There is insufficient memory to perform this operation.
29206 There is insufficient memory to perform this operation. Do you want to try to make room by deleting UNDO records ?
29207 Menu preferences
29208 0123456789.mcinftydpMCINFTYDP
29209 0123456789
29210 0123456789.
29211 YES
29212 NO
29213 Blobby Dialog
29214 XYZxyz
29215 Camelot Tree
29216 &Group;Groups all selected objects so that they can be manipulated as a single object;Group
29217 &Ungroup;Ungroups all selected group objects created using the Group command;Ungroup
29218 &Bring to front;Puts the selected objects on top of all other objects;Bring to front
29219 &Put to back;Puts the selected objects to the back of all other objects;Put to back
29220 Move fo&rwards;Moves the selected objects forward;Move forwards
29221 Move bac&kwards;Moves the selected objects backwards;Move backwards
29222 Ungroup All;Ungroups all groups in the selection, including those nested;Ungroup All
29223 &Apply attribute;Applies the current attributes to all selected objects;Apply attribute
29224 There are no objects selected
29225 It is illegal to group a single group object
29226 There are no groups selected
29227 &Layers;Layers dialog;Layer operation
29228 &ChangeLayers;Change layers;Change layers
29229 Layer names are not unique
29230 attribute
29231 line width
29232 line colour
29233 fill colour
29234 start arrow
29235 end arrow
29236 start cap
29237 end cap
29238 join type
29239 mitre limit
29240 winding rule
29241 dash pattern
29242 change
29245 The selected objects are already at the front or their layers
29246 The selected objects are already at the back of their layers
29247 The selected object is already at the front of its layer
29248 The selected object is already at the back of its layer
29249 Con&vert to editable shapes;Converts all selected objects to shapes;Convert to shapes
29250 There is no document
29251 Move to layer in &front;Moves the selected objects to the layer in front;Move to layer in front
29252 Move to layer be&hind;Moves the selected objects to the layer behind;Move to layer behind
29253 The selected object is already on the lowest visible layer
29254 The selected objects are already on the lowest visible layer
29255 The selected object is already on the highest visible layer
29256 The selected objects are already on the highest visible layer
29257 No objects are currently selected\nDo you wish to set the current attribute ?
29258 Set
29259 Quiet
29260 Help
29261 Change line width;Changes the line width of all selected objects;Change line width
29262 Nothing selected
29263 on
29264 layers
29265 on layer
29266 LAYER
29267 Cu&t;Removes all selected objects and places them onto the clipboard;Cut
29268 &Copy;Places a copy of the selected objects onto the clipboard;Copy
29269 &Paste;Pastes a copy of the objects on the clipboard;Paste
29270 De&lete;Removes all selected objects;Delete
29271 Many
29272 Sorry, a line width must be specified as a positive unit value (eg.'.5pt'). Please re-enter.
29273 The clipboard doesn't contain anything Xara Studio can paste
29274 &Duplicate;Creates a duplicate copy of all selected objects;Duplicate
29275 The Scale Factor dialog is already open
29276 The Unit Setup dialog is already open
29277 Blobby Tab Dialog
29278 Could not create a dialog
29279 text stories
29280 text story
29281 text line
29282 text lines
29283 character
29284 characters
29285 Font
29286 &Kern;Kern;Kern
29441 Untitled ##1%d
29442 Modified
29443 Read-Only
29444 Copy
29445 (#1%s)
29446
29447 #1%d%
29448 Always on &Top
29449 Page
29450 Drawing
29451 Selected
29452 Previous
29453 Transparency is needed to show this document correctly. Printing and viewing may take longer than usual. Do you want to use transparency?
29454 &Use
29455 &Don't use
29456 Be &quiet
29457 This document needs transparency to be shown correctly. Are you sure you want to turn it off?
29458 &Turn off
29459 &Leave on
29460 Closing Document
29461 Exiting CorelXARA
29472 Zoom to &page;Zooms so the visible page fills the view
29473 Zoom to &drawing;Zooms so the visible objects fill the view
29474 Zoom to s&elected;Zooms so the selected object(s) fill the view
29475 &Previous zoom;Restores the last zoom performed in this view
29476 Set zoom &factor;Sets the zooming factor for this view, as a percentage
29504 ZOOM_BAR
29505 PUSH_BAR
29536 Sorry, it was not possible to create a view, as there is not enough free memory available. Close some other applications and then try again.
29537 Sorry, there was a problem accessing the preferences (.INI) file. Please check the file, close some other applications, and then restart this program.
29538 Sorry, a zoom factor must be an integer multiplier (eg. '2x') or a percentage (eg. '55%'), and must be greater than 10%. Please re-enter.
29539 Sorry, that entry is invalid. Please enter a number in the X and Y fields.
29540 Sorry, that entry is invalid. Please enter a positive non-zero number in the Width and Height fields.
29541 Sorry, that entry is invalid. Please enter a positive non-zero number in the X and Y Scale fields.
29542 Sorry, that entry is invalid. Please enter a number in the Angle field.
29543 Sorry, that entry is invalid. Please enter a number in the Shear-angle field.
29544 Selector Tool
29696 Operation token not recognised:
29697 Application has run out of memory!
29698 Syntax error in Menu script\n - Menu initialisation has failed!
29699 Menu script was not found\n - Menu initialisation has failed!
29700 An invalid pathname has been supplied!
29701 Buffer could not be allocated for file:\n
29702 Destructor was called before closing file:\n
29703 An error occured (#1%s) when opening the file: #2%s
29704 End of file has been reached!
29705 File position is beyond the range of the current file!
29706 Destructor was called before closing memory file
29707 File is not open!
29708 Length value is greater than String size!
29709 Memory file pointer is NULL!
29710 Could not open memory file!
29711 Could not load resource!
29712 Memory file is in read only mode!
29713 Memory file is in write only file!
29714 Could not load clipBoard!
29715 Empty clipboard!
29716 Invalid memory file size
29717 Failure allocating memory block
29718 Cannot open this file for writing
29719 Invalid resource size!
29720 Could not reallocate clipboard data
29721 Syntax error in HotKey script\n - HotKey initialisation has failed!
29723 Could not get current DocView object
29724 Could not recognise virtual key
29725 Could not recognise char key
29726 An unknown file i/o error has occurred
29727 Could not save bars configuration file
29728 &New;Create a new document
29729 &Open...;Open a document for viewing
29730 &Close;Close the current document
29731 &Save;Save the current document
29732 Save &as...;Save the current document under a new name
29733 P&rint setup...;Set up the printer
29734 &Print...;Print the current document
29735 Print pre&view;Show print preview of the current document
29736 Re¢ file;Open most recently used files
29738 E&xit;Exit CorelXARA
29739 &Help about this program;Help on using this Viewer
29740 &Using Help;Guide to the help system
29741 &Help;Menu items that offer help about the program
29748 &Copy;Copy the selected objects to the clipboard
29749 Cu&t;Move the selected objects from the active document to the clipboard
29750 &Paste;Insert the contents of the clipboard into the active document
29751 Paste &special...;Insert the contents of the clipboard as a linked, embedded or other form of object
29752 &Undo;Undo the last operation
29753 &Redo;Redo the last operation
29754 &Toolbar;Show or hide the tool bar
29755 &Status line;Show or hide the Status line
29756 &Blobby Op;Do a blobby operation;BlobbyOp
29757 &Push Tool;Choose the Push Tool to move the page
29758 &Zoom Tool;Choose the Zoom Tool to zoom in and out
29759 &Rect Tool;Choose the Rect Test Tool to wibble a wobble
29762 Free&hand Tool;Choose the Freehand Tool to draw and edit lines and shapes;FreeHand
29763 &Selector Tool;Choose the Selector Tool to select and manipulate objects;Selector
29764 &Rectangle Tool;Choose the Rectangle Tool to draw rectangles and squares;Rectangle
29765 &File;Menu items that deal with documents
29766 &Edit;Menu items that deal with objects in the active document
29767 &View;Menu items that deal with the active view
29768 &Ops;The ops menu
29769 &Window;Menu items that deal with the active window and its surroundings
29770 &Print;The print menu
29771 &Dialogs;The dialogs menu
29772 Operation cannot be done because:
29773 &Colour line;Show or hide the Colour line
29774 &Full screen;Toggle full-screen mode
29775 &Scrollbars ;Show or hide the scrollbars
29776 DEFAULT_MENU
29777 SHARED_MENU
29778 CAMELOT_MENU
29779 DEFAULT_HOTKEYS
29780 CAMELOT_HOTKEYS
29781 DEFAULT_BUTTONBAR
29782 CAMELOT_BUTTONBAR
29792 Nothing to undo
29793 Nothing to redo
29808 32-bit Debug
29809 32-bit Retail
29810 16-bit Debug
29811 16-bit Retail
29812 Windows #1%d.#2%d
29813 Windows #1%d.#2%d (Win32s build #3%d)
29814 Windows NT #1%d.#2%d (Build #3%d)
29815 &About CorelXARA;Information about CorelXARA ;AboutOp
29816 About CorelXARA Viewer...;Information about this Viewer
29817 CorelXARA #1%S
29824 Save al&l;Save all documents
29825 &Document info...;Show statistics about the current document
29826 Document op&tions...;Set options for the current document
29827 &Delete;Delete the selected objects without affecting the clipboard
29828 Select &all;Select all objects in the active layers of the current document
29829 C&lear selection;Deselect any selected objects
29830 D&uplicate;Make copies of the current selection
29831 Cl&one;Create an exact copy of the current selection in the same position
29832 O&bject info;Display information about the current selection
29853 &New view;Open a new view window onto the current document
29854 Arrange &icons;Arrange window icons
29855 &Cascade;Cascade windows
29856 &Arrange views;Tesselate all open documents
29858 Smart &windows;Make windows change when the application window changes
29859 Con&trol bars...;Shows or hides the control bars
29860 Page &rulers;Shows or hides the page rulers
29861 &Grids;Shows or hides the grid
29862 &Snap to grids;Turns on or off snapping to the grids
29863 &Print borders;Shows or hides the printable region of pages
29864 &Quality;Menu items that set the view quality of the current document
29865 Se¶tion...;Set the separation shown in the active view
29866 &Anti-aliased;The best quality graphics but also the slowest redraw speed
29867 &Normal;Good quality graphics and also reasonably fast redraw speed
29868 &Simple;Quality good enough to see what you're doing with fast redraw
29869 &Outline;Lowest quality graphics only showing outlines but fastest redraw
29870 &Attribute;Menu items related to attributes in the current selection
29871 A&rrange;Menu items that deal with the relationships between objects
29872 &Utilities;Menu items which provide many useful functions
29873 &Debug;Menu items for development purposes
29875 &Merge...;Merge a document into the current document
29876 &Insert object...;Inserts a new embedded object
29877 Lin&ks...;Allows links to be viewed, updated, opened or cancelled
29878 &Object;<Help dependent on sel object. User should NOT see this message>
29879 File
29880 Edit
29881 Window
29882 Attribute
29883 Arrange
29884 Utilities
29885 Debug
29886 Help
29887 RECT_BAR
29888 STANDARD_HOTKEYS
29889 &Bars;Configure Bars
29892 Dragging an object
29893 You are over a Drop Target
29894 Only one bars control dialogue can be open at any time
29895 No fonts
29896 You can't view all the tools in this screen mode - would you like to make the buttons small ?
29897 Tip of the day...
29898 &Tip of the day;Show useful hints and tips about using CorelXARA;TipOp
29899 Button Palette
29900 Are you sure you want to delete this bar?
29901 You will lose your current bar configuration - are you sure you want to go ahead ?
29902 Make small
29903 Leave large
30208 Phil's example string
30209 Control bars...
30210 New control bar...
30211 Customize control bar...
30212 Infobar
30213 Cannot read new information about bars.
30214 Select all
30215 Clear selection
30216 Select &all;Select all the objects in the active layer(s)
30217 Cl&ear selection;Deselect any selected objects
30218 There are objects selected inside others
30219 Normal click
30220 Shift-click
30221 Ctrl-click
30222 Alt-click
30223 Pop-up menu
30224 Select tool for clicked object
30225 Toggle full-screen mode
30226 Zoom in or out
30240 Pul&l onto grid;Pull the selection to the nearest grid point
30241 Pull onto grid
30465 &Time redraw;Calculate time taken for redisplay
30466 Antialias;Control whether anti-aliasing is used in display
30467 GDraw;Use GDraw or GDI drawing method
30468 GBrush;Use GDraw or GDI fill patterns
30469 GPen;Use GDraw or GDI outlines
30470 Transparency;See real transparency
30530 Debug
30531 Abort
30532 Crash me Ptr
30533 Crash me Int
30534 Crash me Float
30535 Quit
30544 Importing via filter DLL...
30545 Problem loading filter DLL
30546 Not a graphics filter DLL
30547 Filter DLL failed to import (error #1%d)
30592 Cannot create metafile (Create)
30593 Cannot create metafile (while closing)
30594 Cannot create metafile (bad lock)
30595 Exporting metafile...
30596 Writing metafile...
30624 Access violation exception at offset #1%s
30625 Invalid memory access exception at offset #1%s
30626 Floating point exception at offset #1%s
30627 Floating point divide by zero at offset #1%s
30628 Integer divide by zero at offset #1%s
30629 Invalid instruction exception at #1%s
30630 Unhandleable & unidentifiable exception in thread at #1%s
30640 Catastrophic memory failure has occured. Program likely to be unstable
30641 Problem loading #1%s (#2%d). See your installation instructions
30656 If you install #1%s then dialogs will have an improved 3D appearance. See your installation instructions for further details.
30657 #1%s not found. See your installation instructions.
30658 You are using an incompatible version of GDRAW.DLL. See your installation instructions.
30659 You are using an old version of #1%s. See your installation instructions.
30660 You are using an unstable version of #1%s. Program reliability may be affected.
30672 Do you want to save your changes to the '#1%s' document?
30673 &Save
30674 &Don't save
30675 &Cancel
30676 &Help
30677 Windows 95 #1%d.#2%d (Build #3%d)
30704 Importing Windows BMP...
30705 Preparing Windows BMP...
30706 Windows BMP
30707 Export Windows BMP bitmap format files
30708 Exporting Windows BMP...
30712 Invalid file format
30713 Error reading file
30714 File format not supported
30715 Internal error from CorelXARA
30716 #1%s already exists. Do you want to replace it?
30717 &Replace
30718 Internal error
30719 You appear to have a Pentium chip that cannot divide accurately. Program errors may result.
30727 Millimetres
30728 Centimetres
30729 Metres
30730 Inches
30731 Feet
30732 Yards
30733 Points
30734 Picas
30735 Millipoints
30736 Miles
30737 Kilometres
30738 Millimetre
30739 Centimetre
30740 Metre
30741 Inch
30742 Foot
30743 Yard
30744 Point
30745 Pica
30746 Millipoint
30747 Mile
30748 Kilometre
30749 Square
30750 Isometric
30761 DEFAULT_BARS
30762 CAMELOT_BARS
30764 INFO_BAR
30765 Tool Infobar
30784 mm
30785 cm
30786 m
30787 in
30788 ft
30789 yd
30790 pt
30791 pi
30792 mp
30793 mi
30794 km
30795 &Scale factor;Change the scale factor for this spread
30944 Ignoring old or corrupt bars file. Using default settings
30945 The print dialog failed to set up the print job correctly
30946 No default printer. Use Print Manager to install and select a default printer
30976 Render Region couldn't claim memory for Context Stack.
30977 Render Region couldn't release memory for Context Stack.
30978 Can't claim Context Stack. A block is already Claimed.
30979 Can't release block. Context Stack is not Claimed.
30980 No Context Stack to restore !!.
30981 Couldn't expand Context Stack.
30982 Couldn't Shrink Context Stack.
30983 DocView::GetRectChapters can't cope with Coords outside Chapters.
30984 GetPenHwEventData
30985 IsPenEvent
30986 Pressure Sensitive
31129 Time redraw
31130 Would you like to keep the existing documents open ?
31131 Close
31132 Keep
31133 More about CorelXARA;More Information about CorelXARA
31134 About CorelXARA
31135 Toggle full screen
31136 This file contains objects that are not supported in this Viewer, and have been Ignored. The file may not be displayed correctly.
31232 Serious error from CorelXARA
31248 Crash me Render
31385 processed,
31397 converted to greyscale
31488 #1%s colour model
31489 CIE
31490 RGB
31491 CMYK
31492 HSV
31493 Greyscale
31494 Normal colour
31495 Spot colour
31496 Tint of another colour
31497 Linked to another colour
31504 Transparent
31505 Red
31506 Green
31507 Blue
31508 C
31509 M
31510 Y
31511 K
31512 Intensity
31513 Hue
31514 Sat
31515 Value
31520 Colour e&ditor...
31521 More >>
31522 << Less
31523 There are no colour styles available to which I can link this colour
31524 Current line/fill colours
31525 Set 'no colour'
31526 Drag to scroll
31527 Click to scroll
31528 Click to edit current colour
31529 Click to create a new colour
31530 Click sets the colour of selected fill handles
31531 Click/shift-click sets fill/line colour
31532 Click/Drag to scroll the displayed colours
31533 Click/shift-click sets 'no colour' for fill/line
31534 Click/shift-click to edit current fill/line colour
31535 Click to create a new colour
31552 You placed some objects on the Clipboard. Do you want these objects to be available to other applications after you quit CorelXARA? (Preparing for this may take some time)
